Accelerator Options - HPE ProLiant DL325 Gen11 User Manual

Hide thumbs Also See for ProLiant DL325 Gen11:

Table of Contents

20. Power up the server.

Results

The installation is complete.

Accelerator options

This server supports various accelerator options to meet your computational and graphics workload requirements. For a list of supported

accelerator models, see the server QuickSpecs on the Hewlett Packard Enterprise website (https://buy.hpe.com/us/en/p/1014689141

PCIe workload accelerators—These options are PCIe card–based, direct–attach solutions that use solid–state storage technology

directly on the PCI bus to boost I/O performance and reduce latency to scale in line with your processing requirements.

Computational and graphics accelerators—These options deliver accelerated compute performance for a range of deep learning, high–

performance computing (HPC), and graphics–intensive applications.

Subtopics

Accelerator installation guidelines

Installing an accelerator in the GPU riser cage

Installing an accelerator in the primary riser cage

Accelerator installation guidelines

To support high-power accelerators (> TDP 75 W), the accelerator auxiliary power cable option ( P56661-B21) is required.

This server does not support the installation of different accelerator models in the same system.

To maintain proper system cooling, all seven high performance fans are required for accelerator installation.

The limited operating inlet ambient temperatures required for accelerators vary based on the model and the server drive configuration.

For more information, see the server QuickSpecs on the Hewlett Packard Enterprise website

(https://buy.hpe.com/us/en/p/1014689141

https://buy.hpe.com/us/en/p/1014689141).

IMPORTANT:

IMPORTANT: Workloads for high performance accelerators with passive cooling can cause the fans to operate at high

speeds to maintain optimum system cooling. Hewlett Packard Enterprise does not recommend installing accelerators with

passive cooling in or near a site where there is a reasonable expectation for a quiet environment.

Installing an accelerator in the GPU riser cage

Prerequisites

Review the accelerator installation guidelines.

Before you perform this procedure, make sure that you have the following items available:

T-15 Torx screwdriver

T-10 Torx screwdriver

About this task

https://buy.hpe.com/us/en/p/1014689141).

HPE ProLiant DL325 Gen11 Server User Guide

148

Table of Contents