9. Install the following options:
Low-profile expansion card
HPE NS204i-u Boot Device
10. If the boot device is not installed in the riser cage, or to prevent hot-plug access to the SSDs on the boot device, install the security
cover.
11. Install the NS204i-u + secondary low-profile riser cage:
a. Carefully press the riser down on its system board connector (callout 1).
Make sure that:
The riser cage is aligned with the rear chassis.
The riser board is firmly seated on the system board.
HPE ProLiant DL325 Gen11 Server User Guide
127