Table of Contents
Advertisement
6. Remove the access panel .
7. Remove the DIMM blank:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all DIMM slots have
CAUTION:
either a DIMM or a DIMM blank installed.
a. Open the DIMM slot latches.
b. Lift the blank from the DIMM slot.
8. Install the DIMM:
a. Open the DIMM slot latches.
b. Align the notch on the bottom edge of the DIMM with the keyed surface of the DIMM slot, and then fully press the DIMM into the slot
until the latches snap back into place.
The DIMM slots are structured to ensure proper installation. If you try to insert a DIMM but it does not fit easily into the slot, you
might have positioned it incorrectly. Reverse the orientation of the DIMM and insert it again.
HPE ProLiant DL325 Gen11 Server User Guide
122
Advertisement
Table of Contents
