Table of Contents
Advertisement
b. Disconnect each power cord from the server.
2. Disconnect all peripheral cables from the server.
3. Remove the server from the rack.
4. Place the server on a flat, level work surface.
5. Remove the access panel .
6. Remove the system battery:
a. Use a small flat-bladed, nonconductive tool to press the battery latch.
b. Remove the system battery from the socket.
7. Install the system battery:
a. With the side of the battery showing the "+" sign facing up, insert the battery into the socket.
b. Press the system battery down until it clicks into place.
8. Properly dispose of the old battery.
HPE ProLiant DL325 Gen11 Server User Guide
232
Advertisement
Table of Contents
