Remove The Air Baffle - HPE ProLiant DL325 Gen11 User Manual

b. Take both sides of the middle cover and detach from the server.

Remove the air baffle

Remove the air baffle
About this task About this task
CAUTION: CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks
installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Remove the server from the rack.
5. Place the server on a flat, level work surface.
6. Remove the access panel .
7. Remove the air baffle.
HPE ProLiant DL325 Gen11 Server User Guide 55