Remove The Primary Riser Cage - HPE ProLiant DL325 Gen11 User Manual

Remove the primary riser cage

Remove the primary riser cage
About this task About this task
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to
cool before touching them.
CAUTION: CAUTION:
To prevent damage to electrical components, properly ground the server before beginning any installation, removal, or
replacement procedure. Improper grounding can cause electrostatic discharge.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Remove the server from the rack.
5. Place the server on a flat, level work surface.
6. Remove the access panel .
7. If a full-length expansion card is installed, slide the card retainer to the open position.
HPE ProLiant DL325 Gen11 Server User Guide 57