HPE ProLiant DL325 Gen11 User Manual page 132

3. Disconnect all peripheral cables from the server.
4. Remove the server from the rack.
5. Place the server on a flat, level work surface.
6. Remove the access panel .
7. Remove the middle cover .
8. Do one of the following:
Remove the secondary riser cage.
Remove the secondary riser cage blank.
9. Remove the OCP slot blank:
a. Remove the blank screw.
b. Remove the blank.
Retain the screw and blank for future use.
HPE ProLiant DL325 Gen11 Server User Guide 132