Table of Contents
Advertisement
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply, power supply blank, or dual slot
WARNING:
power supply adapter to cool before touching it.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
CAUTION:
either a component or a blank.
Procedure
Procedure
1. If installed, open the cable management arm.
2. If you are installing a power supply in the power supply bay 2, remove the power supply blank.
Retain the blank for future use.
3. Immediately slide the power supply into the bay until it clicks into place.
HPE ProLiant DL325 Gen11 Server User Guide
83
Advertisement
Table of Contents
