Table of Contents
Advertisement
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
Fig. 57: User Management (4)
5.
Define the desired settings (for explanations, see p. 79).
6.
Press
to return to Settings or
5.4.2
Authorizations as Default Technician
The factory setting for the Default Technician requires that the tech-
nician enter their username and password (technician, 25483) to log
in. If selecting User Management as a Default Technician ( p. 76),
you will be presented with the following interface:
Fig. 58: (
p. 80)Authorizations as Default Technician
①
(1) - Tab for roles and users
(2) - List of roles/users
On the left-hand side, you can select between the tabs (1) re-
served for roles (
tions are provided further below.
②
(3) - Specify roles/users
and users (
p. 80)
to return to Manual mode.
③
. Detailed explana-
p. 84)
79
Advertisement
Table of Contents
