Table of Contents
Advertisement
158
2.
Download the latest version of the software from the manu-
facturer's website (www.duerkopp-adler.com) and save it to
a USB key.
3.
Plug the USB key into the port on the control panel.
4.
Open the burger menu and select the menu Settings –
Software Update.
A window listing the files stored on the USB key opens.
5.
Select the file containing the software update.
Another window opens.
6.
To start the software update, press on the Start Update button.
7.
Wait until advised that the USB key can be removed OR that
the control panel was restarted.
Information
If detecting - while the control panel is being restarted - that the
software of the control requires an update as well, the system will
start this update automatically.
It may take up to 15 minutes for the system to complete the update
and restart the control panel successfully.
8.
Once the control panel has been restarted, the machine can
be used again.
9.
If you have not already done so, you can now remove the
USB key.
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
Advertisement
Table of Contents
