Authorizations As Default Technician - Dürkopp Adler D669 Operating Instructions Manual

Programming
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
5.4.1

Authorizations as Default Technician

The factory setting for the Default Technician requires
that the technician enter their username and password
(technician, 25483) to log in. If selecting User Management
as a Default Technician ( p. 54), you will be presented
with the following interface:
Fig. 37: Authorizations as Default Technician
①
(1) - Tab for roles and users
(2) - List of roles/users
On the left-hand side, you can select between the tabs (1) reserved
for roles ( p. 58) and users ( p. 62). Detailed explanations
are provided further below. To the right of the tabs you will find
the list (2) of created roles / users - varying with the tab (1) you
selected. On the far right, you will find the settings (3) associated
with the role/user you selected.
Explanation of role and user
Role
A role defines which authorizations
are permitted or forbidden.
It is possible to assign more than
one role to a single user.
You need to be a user to log in;
you cannot log in using a role.
②
(3) - Settings for
roles/users
User
You can log in as a user.
A user can be assigned one or
several roles - this is how they
receive their authorizations.
③
57