Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
Adjusting the information displayed in the status bar
To adjust the appearance of the status bar:
1.
Go to Settings (see above).
Fig. 66: Setting up the user interface (4)
(4) - Screen configuration
2.
Go to Screen configuration (4) and press on Manual mode - Status
bar configuration (5).
The interface used for configuring the status bar opens.
Fig. 67: Status bar configuration (5)
3.
Press and hold the desired symbol and drag it to move it into
or out of the status bar.
4.
Press
to return to Settings or
(5) - Status bar configuration
to return to Manual mode.
④
⑤
93