Dürkopp Adler D888 e-con Operating Instructions Manual page 105

Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
Options for setting the Needle thread tension parameter
Menu item Setting 1
Linear Needle thread tension
Value range
absolute
00 – 99 [%]
Min. Material thickness
Value range
00.0 – 10.0 [mm]
Max. Material thickness
Value range
00.0 – 10.0 [mm]
Linear Offset
Value range
with
-99 – 99
offset
Min. material thickness
Value range
00.0 – 10.0 [mm]
Max. material thickness
Value range
00.0 – 10.0 [mm]
2. Value Min. Material thickness
Value range
On/Off
00.0 – 10.0 [mm]
2. Value On Min. Material thickness
Value range
00.0 – 10.0 [mm]
Setting 2
Maximum needle thread
tension reached at the upper
material thickness limit.
Material thickness at which
the increase in needle
thread tension should start.
Material thickness up to
which the increase in needle
thread tension should occur.
Difference up to maximum
needle thread tension
reached at the upper
material thickness limit.
Material thickness at which
the increase in needle
thread tension should start.
Material thickness up to
which the increase in needle
thread tension should occur.
Material thickness from
which the second needle
thread tension should be
used.
Material thickness from
which the second needle
thread tension should be
used.
103