Table of Contents
Advertisement
Setup
Operating Instructions D888 e-con - 00.0 - 12/2023
Fig. 107: Establishing equipotential bonding
(1) - Control connection
(2) - Motor ground cable
To establish equipotential bonding:
1.
Connect the ground cable to the port on the switch box (1).
2.
Feed the ground cable through the hole in the tabletop.
3.
Connect the ground cable to the port on the machine head (4).
Important
To establish equipotential bonding, you need to assemble the nec-
essary components to the connection on the control in the following
order: Locking washer, ground cable of the machine head (3), ground
cable of the motor (2), washer, nut.
② ③
④
(3) - Ground cable
for the machine head
(4) - Connection
to the machine head
①
193
Advertisement
Table of Contents
