Dürkopp Adler D888 e-con Operating Instructions Manual page 139

Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
Setting options Stitch length
Menu item Setting 1
Linear Offset
Value range
with
-50 – 50 [%]
offset
Min. Material thickness
Value range
00.0 – 10.0 [mm]
Max. Material thickness
Value range
00.0 – 10.0 [mm]
2. Value Min. Material thickness
Value range
On/Off
00.0 – 10.0 [mm]
2. Value On Min. Material thickness
Value range
00.0 – 10.0 [mm]
Setting 2
Maximum stitch length
variation reached at the
upper material thickness
limit.
Material thickness at which
the increase/reduction of
the stitch length should
start.
Material thickness up to
which the increase/
reduction of the stitch
length should occur.
Material thickness from
which the second stitch
length should be used.
Material thickness from
which the second stitch
length should be used.
137