Table of Contents
Advertisement
30
Threading the left needle thread at the tensioning plate
Fig. 12: Threading the needle thread (two-needle machine) (2)
⑤
⑥
⑦
(1) - Tube (left thread)
(3) - Rear tension (left thread)
(4) - Pretension (left thread)
(5) - Front tension (left thread)
4.
Insert the thread from the top and guide it through the tube (1).
5.
Feed the thread counterclockwise from the tube (1) around
the pretension (4).
6.
Feed the thread clockwise through the rear tension (3).
Fig. 13: Threading the needle thread (3)
(3) - Rear tension
7.
Feed the thread clockwise around the pin (6) and keep feeding
it clockwise through the front tension (5).
④ ③
①
⑧
(6) - Pin (left thread)
(7) - Rear thread tensioning spring
(8) - Hook
(5) - Front tension
Operating Instructions D888 e-con - 00.0 - 12/2023
Operation
③
⑤
Advertisement
Table of Contents
