Table of Contents
Advertisement
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
Fig. 73: Sewing in Automatic mode
①
②
(1) - Progress in the segment
Possible actions in the course of the seam
The following table lists the functions that can be performed in
the course of the seam.
Button/Pedal
Press the pedal
halfway back.
Press the pedal
fully back or
cancel by pressing
the X.
(2) - Progress in the program
Function
• Skip to previous/next segment.
• Lift the foot.
• Cut off or cancel the program.
The program remains stopped at the cutoff
point.
• An alternative option is to activate the
parameter segment switch by pedal in the
program defaults. The segment switch will
then occur when the pedal is pressed fully
back
• Visible as soon as the sewing process starts.
• Start repair mode. Repair mode can be set in the
program defaults.
•
Cancel a seam program by pressing again.
121
Advertisement
Table of Contents
