Adjusting The Hook Thread Tension - Dürkopp Adler D888 e-con Operating Instructions Manual

Operation
Operating Instructions D888 e-con - 00.0 - 12/2023
4.8.2

Adjusting the hook thread tension

WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Switch off the machine before adjusting the hook
thread tension.
Fig. 23: Adjusting the hook thread tension
(1) - Drill hole for screw
Turn the screw (2) to adjust the hook thread tension using
a screwdriver that you insert through the drill hole (1).
To adjust the hook thread tension:
Increasing the hook thread tension
1. Turn screw (2) clockwise.
Reducing the hook thread tension
1. Turn screw (2) counterclockwise.
①
②
(2) - Screw
41