Managing Segments; Setting Program Parameters - Dürkopp Adler D888 e-con Operating Instructions Manual

Programming Commander DELTA
Icon Parameter
Program activation
Scan code
(Function only available with activated
scanner)
Additional values (+)
Additional value stitch length (+)
The second value for the stitch length
can be switched on using the button on
the push button panel or the tile on the
control panel.
Additional value needle thread tension (+)
The second value for the needle thread
tension can be switched on using the
buttons on the push button panel or the
tile on the control panel.
Operating Instructions D888 e-con - 00.0 - 12/2023
5.9.4

Managing segments

You can create, delete and copy segments. Managing the items
is quick and easy thanks to the buttons listed below.
Edit segments
Add segment
Delete segment
Copy and insert a segment
5.9.5

Setting program parameters

There are various options for setting the cross-program parame-
ters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Settings
( p. 133)
Value range
01.0 – 12.0 [mm]
(depending on sewing equipment
and subclass)
Value range
01 – 99 [%]
129