Table of Contents
Advertisement
Setup
Operating Instructions D888 e-con - 00.0 - 12/2023
Fig. 92: Inserting the machine head (1)
③
①
(1) - Rubber inlays
(2) - Upper hinge parts
To insert the machine head:
1.
Tighten the upper hinge parts (2) onto the machine head.
2.
Guide the cables (3) through the tabletop with great care so
as not to create any chafing or pinching points.
3.
Insert the machine head from above at an angle of 45°.
4.
Insert the upper hinge parts (2) into the rubber inlays (1).
(3) - Cables
②
179
Advertisement
Table of Contents
