Table of Contents
Advertisement
120
Explanations of icons/symbols in Automatic mode:
Symbol/Icon
X
5.8.1
Sewing in Automatic mode
To sew in Automatic mode:
1.
Select the program.
2.
Press the pedal forward and sew.
You can see the following on the control panel:
Programming Commander DELTA
Meaning
Selected program
Move to the next or previous step in seams/
segments – also during the seam
Abort a seam program
Seam/segment including information on the
settings for seam beginning, seam and seam
end
Display of the entire program including its
seams and segments.
Adjustment factors that can still be adjusted
during the seam.
The shaded tiles for information about the
set parameters can be adjusted under
Programming ( p. 122).
Blue tiles can only be activated or deactivated.
You define which tiles will be visible by
programming ( p. 122).
Operating Instructions D888 e-con - 00.0 - 12/2023
Advertisement
Table of Contents
