Table of Contents
Advertisement
Icon
Parameter
Bobbin wind speed
Bobbin wind mode
Bobbin wind turns
(Only visible if Turns has been selected)
118
5.7.7
Using bobbin wind mode
A bobbin can be wound without sewing. You can choose if you
want the winding process to stop automatically when the bobbin
is full or not until the bobbin shaft has completed a certain number
of rotations.
To use bobbin wind mode:
1.
When setting up the user interface ( p. 89), drag the tile for
bobbin wind mode onto the main screen.
2.
Press
to return to Manual mode.
3.
Press and hold the bobbin wind mode symbol and select one
of the options Lever or Turns.
4.
Define and confirm the settings.
Bobbin wind mode begins.
Programming Commander DELTA
Setting
Value range
001 – 100 [%]
Value range
Lever/Turns
Value range
0000 – 9999
Operating Instructions D888 e-con - 00.0 - 12/2023
Advertisement
Table of Contents
