Dürkopp Adler D888 e-con Operating Instructions Manual page 76

74
Fig. 51: Desk height adjustment (2)
2. Define the desired settings:
Icon Meaning
Reset
Sets the height to the next measured value. Use this
to reset the system when the point of measuring has
changed.
A desk height sensor error (warning: 9956) requires a
reset ( p. 205).
Desk up
The desk moves up manually.
Desk down
The desk moves down manually.
Use Position
Press and hold this button to store the current position
as the target position.
Positioning Start (Standing)
Press this button to start positioning the desk to
the target height.
Positioning Start (Custom)
Press this button to start positioning the desk to
the target height.
Positioning Start (Sitting)
Press this button to start positioning the desk to
the target height.
 Desk is positioning.
To cancel the positioning before the target position has been
reached, tap the touch area.
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023