Dürkopp Adler D888 e-con Operating Instructions Manual page 153

Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
5.9.7.1 Setting the Puller parameters
The puller supports the transport of the sewing material. The feed
of the two rollers is calculated automatically based on the stitch
length of the machine. An adjustment may be necessary depend-
ing on the application.
The rollers of the puller can be adjusted separately. The input is
in percent: a positive value increases the roller feed while a
negative value reduces the feed.
Icon Menu item
Puller correction synchronization (Top/Bot-
tom)
This function is used to synchronize the
correction values for the top and the
bottom roller.
Correction top roller
The feed of the top roller is calculated
automatically based on the stitch
length. An adjustment may be neces-
sary depending on the application.
The rollers can be adjusted separately.
The input is in percent and will either
increase or reduce the feed.
Correction bottom roller
The feed of the bottom roller is calcu-
lated automatically based on the stitch
length. An adjustment may be neces-
sary depending on the application.
The rollers can be adjusted separately.
The input is in percent and will either
increase or reduce the feed.
Setting
Value range
On/Off
Value range
-10 – 10 [%]
Value range
-10 – 10 [%]
151