Dürkopp Adler D888 e-con Operating Instructions Manual page 142

140
Setting options Max. sewing speed
Menu item Setting 1
Linear Max. Speed
Value range
absolute
0000 – 4000 [rpm]
Min. Material thickness
Value range
00.0 – 10.0 [mm]
Max. Material thickness
Value range
00.0 – 10.0 [mm]
Linear Max.
with Sewing speed
Value range
offset
-3000 – 0000
Min. material thickness
Value range
00.0 – 10.0 [mm]
Max. material thickness
Value range
00.0 – 10.0 [mm]
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
Setting 2
Maximum speed reached
at the upper material
thickness limit.
Material thickness at which
the increase in sewing
speed should start.
Material thickness up to
which the increase in
sewing speed should
occur.
Difference up to maximum
speed reached at the upper
material thickness limit.
Material thickness at which
the increase in sewing
speed should start.
Material thickness up to
which the increase in
sewing speed should
occur.