Table of Contents
Advertisement
76
5.3.9
Setting the screen configuration
The screen configuration is used for the display of the tiles in
Manual mode.
The setting is explained at the appropriate place in the chapter on
Manual mode ( p. 89).
5.4
User Management
The User Management section allows you to create users and roles
with different authorizations.
The setting is such that the Default User will automatically be logged
in when the machine starts. You can change this setting at the
Technician level as needed.
The following is an explanation of the user Default Technician, which
is the default user. You can, of course, set up any number of users
and roles that meet your individual requirements.
Requirement for User Management administration: You have to
be logged in as the Default Technician.
5.4.1
Authorizations as Default Technician
To log in as the Default Technician:
1.
Log in by entering technician and 25486 for username and
password.
2.
Press the symbol
This opens the navigation interface.
Programming Commander DELTA
to bring up the navigation pane.
Operating Instructions D888 e-con - 00.0 - 12/2023
Advertisement
Table of Contents
