Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
5.8
Using Automatic mode
Automatic mode is comprised of all stored programs.
To access the Automatic mode:
1.
Press the symbol
This opens the navigation interface.
Fig. 71: Using Automatic mode (1)
(1) - Automatic mode
2.
Press Automatic mode (1).
The interface of Automatic mode opens. The program stored
last is loaded.
The display shows tiles and information below the upper bar that
vary with the select program:
Fig. 72: Using Automatic mode (2)
to bring up the navigation pane.
①
119