Dürkopp Adler D888 e-con Operating Instructions Manual page 62

60
5.2.5.1 Logging in with username and password
Assigning a username and password
To assign a username and password:
1. Create a new user in User Management and assign this user a
username and password ( p. 84).
 The user can log in immediately with this login information.
Logging in with username and password
To log in with username and password:
1. Enter username and password.
2. Press .
 If the login information is correct, the user will be logged in.
5.2.5.2 Login using USB
Assigning a USB key to a user
To assign a USB key to a user:
1. Select a user in User Management or create a new user
( p. 84).
2. Press the item Login using USB.
 A new window opens.
3. Plug the USB key into one of the ports on the control panel.
4. Select the USB key you wish to assign to the user for login
purposes.
5. To assign the USB key, press Pair.
 The window disappears, and the function Login using USB is
active.
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023