Dürkopp Adler D888 e-con Operating Instructions Manual page 127

Programming Commander DELTA
Icon Parameter
Seam Parameter
Stitch length
Can only be adjusted before the first
stitch of a segment.
Needle thread tension
Fullness top
Fullness botton
Sewing foot pressure
Max. Speed
It is possible to reduce the maximum
sewing speed at this point. The maxi-
mum sewing speed can be set in the
software at the Technician level.
Automatic skip to next seam segment
Automatic stitch count active or
inactive.
Sewing stop
Automatic sewing stop at segment
end. The pedal has to be released to
continue the sewing process. 0 = Off,
1 = On
Bartack at seam begin
Can only be adjusted before the first
stitch of a segment.
Bartack at seam end
Operating Instructions D888 e-con - 00.0 - 12/2023
Setting
Value range
0.00 – 6.00 [mm]
(depending on the sewing equipment
and the subclass)
Value range
01 – 99
Value range
-06 – 16
Value range
-06 – 16
Value range
01 – 20
Value range
0150 – 3500 [rpm]
(depending on subclass)
Value ranges
On/Off
Value ranges
On/Off
Value range
On/Off
( p. 111)
Value range
On/Off
( p. 115)
125