Dürkopp Adler D888 e-con Operating Instructions Manual page 100

Icon Parameter
Correction speed effect
Correction speed effect
Stitch length
Needle thread tension
Sewing foot pressure
Function modules
Function modules 1-8
Output
Segment Output 01–16
98
Programming Commander DELTA
Settings
Value range
On/Off
( p. 106)
The stitch length changes slightly
depending on the speed. For this
reason, the stitch length can be
adjusted at different speeds by
the software.
Depending on the speed, the
needle thread tension can be
adjusted at different speeds by
the software.
Depending on the speed, the
sewing foot pressure can be
adjusted at different speeds by
the software.
( p. 110)
( p. 110)
Operating Instructions D888 e-con - 00.0 - 12/2023