Dürkopp Adler D888 e-con Operating Instructions Manual page 135

Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
5.9.5.1 Activating a program using a scan code
To activate a scanner:
1. Log in by entering technician and 25483 for username and
password.
2. Open the burger menu and go to Settings - Machine
configuration to select the button Scanner.
3. Activate Scanner and Scan Program Barcode Strings.
4. Press to go back.
5. Press the Interface button.
6. Press the BDE button.
7. Setting Scanner Mode.
8. Switch off and on the machine.
 Scanner beeps.
 A correctly taught scanner will now be ready for use.
To activate a program using a scan code:
Fig. 79: Activating a program using a scan code
(1) - Text field
1. Call up Programming mode > Program parameters.
2. Scan the code.
 The name of the program is displayed in the text field (1).
To call up a program using a scan code:
1. Call up Automatic Mode.
2. Scan the code.
 The program stored in the code is active.
①
133