Dürkopp Adler D888 e-con Operating Instructions Manual page 75

Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
4. Define the desired settings:
Icon Parameter
Desk height adjustment
enable
Desk height offset
If there is an obstacle
below the sensor, the dis-
tance between the obsta-
cle and the floor must be
specified.
Table height
5. Open the burger menu and click on the Logout button to log
out of the Default Technician.
Fig. 50: Desk height adjustment (1)
To set the desk height:
1. Open the burger menu and go to Settings - User Configuration to
select the button Desk height adjustment (1).
Setting
Value range On/Off
Value range
-60.0 - 80.0 [cm]
Value range
000.0 - 140.0
73