Dürkopp Adler D888 e-con Operating Instructions Manual page 216

Code Type
2431 Error
2471 Error
2472 Error
2473 Error
2474 Error
2475 Error
2476 Error
2477 Error
2478 Error
2479 Error
2480 Error
2481 Error
2483 Error
214
Possible cause
Stepper card X60
initialization failure
Stepper card X60 Watchdog
(Edge guide)
Stepper card X60 motor
overload/overvoltage/over-
current (Edge guide)
Stepper card X60 Sewing
motor encoder not connected
(Edge guide)
Stepper card X60 sewing
motor encoder not initialized
(Edge guide)
Stepper card X60 init posi-
tion not found (Edge guide)
Stepper card X60 not
enabled (Edge guide)
Stepper card X60 overload
(Edge guide)
Stepper card X60 encoder
failure (Edge guide)
Stepper card X60 Current
sensor failure (Edge guide)
Stepper card X60 Incorrect
stepping motor direction of
rotation (Edge guide)
Stepper card X60 reference
drive failure (Edge guide)
Stepper card X60 overcurrent
(Edge guide)
Corrective
• Perform software update
• Check selection of class
• Perform software update
• Check selection of class
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
• Replace the control
• Perform software update
• Check selection of class
• Check for stiff movement
• Replace encoder
• Replace motor
• Replace the control
• Check for stiff movement
• Replace encoder
• Replace motor
• Replace encoder
• Replace the control
• Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine distribu-
tor and change it if necessary
• Check for stiff movement
• Replace encoder
• Replace motor
• Replace the control
Operating Instructions D888 e-con - 00.0 - 12/2023
Troubleshooting