Sewing - Dürkopp Adler D888 e-con Operating Instructions Manual

50

4.13 Sewing

WARNING
Risk of injury from the needle if sewing is
started unintentionally!
Puncture possible.
Do not press the pedal when your fingers are in
the area of the needle tip.
Fig. 32: Sewing
(1) - Position +1
(2) - Position 0
The pedal starts and controls the sewing process.
Status Processes
Before starting sewing
Initial situation • Pedal in rest position (position 0)
Machine is at a standstill.
Needle is up. Roller foot is down.
Positioning • Press the pedal halfway back (position -1)
the sewing The roller foot is raised.
material. • Correct the position of the sewing material.
• Release the pedal.
The roller foot is lowered onto the sewing material.
(3) - Position -1
(4) - Position -2
Operating Instructions D888 e-con - 00.0 - 12/2023
Operation
①
②
③
④