Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
5.2.5
User login
The factory setting of the software is such that the Default User will
be logged in automatically when the machine is switched on.
This does not require any type of authorization. The following
explains how you can switch users.
To access User Management:
1.
Press the symbol
This opens the navigation interface.
Fig. 37: User login (1)
(1) - Logout
2.
Press Logout (1).
This opens the Login interface.
There are three ways to log in. The three options - including the
necessary settings in the software - are described below.
to bring up the navigation pane.
①
59