Dürkopp Adler D888 e-con Operating Instructions Manual page 106

104
Setting options Sewing foot pressure
Menu item Setting 1
Linear Sewing foot pressure
Value range
absolute
00 – 20
Min. Material thickness
Value range
00.0 – 10.0 [mm]
Max. Material thickness
Value range
00.0 – 10.0 [mm]
Linear Offset
Value range -20 – 20
with
offset
Min. material thickness
Value range
00.0 – 10.0 [mm]
Max. material thickness
Value range
00.0 – 10.0 [mm]
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023
Setting 2
Maximum sewing foot
pressure reached at the
upper material thickness
limit.
Material thickness at which
the adaption in sewing foot
pressure should start.
Material thickness up
to which the adaption in
sewing foot pressure should
occur.
Difference up to maximum
sewing foot pressure
reached at the upper
material thickness limit.
Material thickness at which
the increase in sewing foot
pressure should start.
Material thickness up to
which the increase in sewing
foot pressure should occur.