Managing Segments; Setting Program Parameters - Dürkopp Adler D669 Operating Instructions Manual

Programming
Icon Parameter
Additional values (+)
Additional value stitch
length (+)
The 2
be switched on using a button on
the push button panel or the tile on
the control panel.
Additional value sewing foot
stroke (+)
The 2
can be switched on using a button on
the push button panel, the knee button
or the tile on the control panel.
Additional value needle
thread tension (+)
The 2
tension can be switched on using a
button on the push button panel or the
tile on the control panel.
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
5.8.4

Managing segments

You can create, delete and copy segments. Managing the items
is quick and easy thanks to the buttons listed below.
Edit segments
Add segment
Delete segment
Copy and insert a segment
5.8.5

Setting program parameters

There are various options for setting the cross-program parame-
ters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
nd
value for the stitch length can
nd
value for the sewing foot stroke
nd
value for the needle thread
Setting
Value range
00.0 - 12.0
(depending on sewing equipment
and subclass)
Value range
05.0 - 09.0 [mm]
Value range
01 - 99
103