Managing Segments; Setting Program Parameters - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Icon Parameter
Additional values (+)
Additional value stitch length (+)
The 2
be switched on using a button on the
push button panel or the tile on the
control panel.
Additional value needle thread tension (+)
The 2
tension can be switched on using a
button on the push button panel or the
tile on the control panel.
Additional value of lower difference (+)
The 2
switched on using a button on the push
button panel, with the knee button or
with the button on the control panel.
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
6.7.4

Managing segments

You can create, delete and copy segments. Managing the items
is quick and easy thanks to the buttons listed below.
Edit segments
Add segment
Delete segment
Copy and insert a segment
6.7.5

Setting program parameters

There are various options for setting the cross-program parame-
ters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
nd
value for the stitch length can
nd
value for the needle thread
nd
value for the difference can be
Settings
Value range
0.1 to 7.0 [mm]
(depending on sewing equipment and
subclass)
Value range
01 to 99 [%]
Value range
-6 to 16
119