Setting The Segment Begin Parameters - Dürkopp Adler 878-M PREMIUM Operating Instructions Manual

Icon Parameter
Parameter Seam Begin
Needle thread clamp
The needle thread clamp is closed at
st
the 1
the needle thread lies on the underside
of the sewing material.
Seam begin bartack parameters
Bartack at seam begin
Number of stitches backwards
Number of stitches forward
104
6.5.3.4 Setting the
This parameter provides virtual outputs that can be assigned cus-
tomer-specific functions. They can be used when customer-specific
applications require a signal from the control of the machine.
This parameter cannot be used unless the virtual outputs have been
assigned to a physical output at the Technician level. This requires
that the parameter Additional I/O Configuration can be
configured at the Technician level; for more details, refer to the
explanation in the  Service Instructions.
6.5.4 Setting the
There are various options for setting the Segment Begin param-
eters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
stitch of the seam to ensure that
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Outputs (Output)
parameters
Segment Begin
Settings
Value range
On/Off
Value range
On/Off
Value range
01 to 50
Value range
01 to 50
parameter