Setting The Parameters - Dürkopp Adler 513 Operating Instructions Manual

54
Fig. 40: Copying/deleting a seam pattern sequence (2)
Information
If the LED is off, press the
del P pat.
4.6

Setting the parameters

Fig. 41: Setting the parameters (1)
To set the parameters:
1. Press the
 The system menu appears.
2. Use the
3. Press the
 The submenu for setting the parameters appears:
button and select 02 Copy/
button.
buttons to select 01 Sys U param.
button to confirm.
Operating Instructions 513/533 - 01.0 - 09/2023
Programming