Table of Contents
Advertisement
Resetting the Override Setting of a Measurement Value
4.29
How to reset the overriding setting of a measurement value is indicated below.
1) Carry out either one of the following.
(a) Right-click the measurement value on the
bay single line diagram to display the
context menu. Click "Manual Override"
from the context menu.
(b) Click the corresponding row of the list of
the measurement values in the "Bay
Information"
measurement value.
Right-click it to display the context menu.
Click "Manual Override" from the context
menu.
2) The "Manual Override" dialog is displayed.
The setting value for manual override is
displayed in the Setting Value column.
73
6F2M2000
dialog
to
select
the
Advertisement
Table of Contents
