Changing Ied Mode (Online/Test) Of Dual Bcu - Toshiba GSC1000-C Operation Manual

Changing IED Mode (Online/Test) of Dual BCU

4.54
How to change the IED mode (Online/Test) of dual BCU is indicated below. This procedure
can be done in the system that applying dual BCU function only.
The "Mode Change" dialog is displayed.
Click OK.
4)
5) "Mode Change" dialog is closed and the IED
mode display of the "System" window is
changed.
1) Click System in the main menu bar to display
the "System" window.
2) For SAS that applying dual BCU function with
Hot/Standby status, IED mode changing must
be done from Hot BCU.
Identify the Hot BCU whose mode is to be
changed.
IED mode of dual BCU cannot be changed
from Standby BCU. The IED mode of standby
BCU will automatically change following the
IED mode of Hot BCU.
117
6F2M2000