Toshiba GSC1000-C Operation Manual page 282

 Software Interlock Bypass: Click this button to bypass the interlock check.
 Control direction buttons: These buttons set the control direction of a device.
Open Close:
When the operational direction is selected, the conformation message is displayed. When OK
is clicked, Execute becomes active.
 Execute: When this button is clicked, the conformation message is displayed. When OK button
is clicked, the operation command is sent.
 Cancel: Clicking this button releases the selection.
 Control guidance display area: This area displays guidance messages.

Close: Clicking this button closes the dialog.
This button is displayed when the Interlock condition is set for the
device and if the Interlock condition is not satisfied.
This button is displayed only to a user with an
authority for bypassing Interlock.
281
6F2M2000
(Interlock Guidance dialog)