Table of Contents
Advertisement
5) Extraction status setting combo box:
6) Apply:
Button to apply the condition set in above step 4) and 5) and to display it at 7).
7) Display colum for set extraction condition: This column displays the extraction condition already
Item:
Status:
The extraction condition of status under the same item name becomes OR condition.
Other conditions are AND condition.
8) Delete: This button is used to delete the set extraction condition.
When the row is selected from the display column for set extraction condition 7) and
Delete is clicked, the corresponding row is deleted.
9) SAVE:
This button is used to save the extraction condition in a file by CSV format.
10) LOAD:
This button is used to load the extraction condition from a file.
11) Alarm status check box: This check box is used to set a filtering by the status of alarms.
12) Not-ACK extraction check box:
13) Fault extraction check box:
14) Execute:
15) Cancel:
Event Window
6.7
The "Event" window displays events detected in the Substation Automation System and events
The title name of each column is displayed in the combo
box.
Item name (column title) used as the condition
Status used as the condition
This check box is used to extract unacknowledged alarms.
This check box is used to extract a persistent fault.
Clicking this button extracts the data with set condition and
displays the extracted data in a list.
Clicking this button cancels condition setting and closes the
dialog.
This combo box is used to select the status for the
extraction condition.
The status corresponding to the item selected in
above 4) is displayed in a list format. The
background color of the row already set as
extraction condition is indicated in reversed color.
The selection is reset by clicking the selected row
again.
set.
307
6F2M2000
Advertisement
Table of Contents
