Table of Contents
Advertisement
Outline of windows are listed in the following table. (Table 6.2.1)
Window
Single line diagram
- Overview
- Tr Parallel
- LVAC
- DC/UPS,
- Common)
(Refer to Section
6.5)
GIS
(Refer to section 6.5.2)
System monitoring
(Refer to section 6.5.3)
Event
(Refer to section 6.7)
Alarm
(Refer to section 6.6)
Trend
(Refer to section 6.9)
Energy Report
(Refer to section 6.8)
Load shedding
PLC
(Refer to section 4.142)
Table 6.2.1 List of windows
Outline
Single line diagram display.
Following operations are enabled:
・ Selection and control of devices and switches
・ Sequence control
・ Tap control
・ Manual override, blocking and safety tag
setting
・ Measurement value setting
・ Transit to the "Trend" window
GIS gas compartment status display.
Display of GIS gas pressure list
Display of system operating status of each
equipment failure status
Temperature measurement value display
Following operations are enabled:
・ Control of IED mode
・ Printer setting
・ Reset LED of IED
・ Change relay group setting
・ Display disturbance record
・ Start the RSM software
Display of event list
Filtering of displayed contents
Display of alarm list
Filtering of displayed contents
Trend display of various data
Display and print out of Energy Report
Setting of load shedding
Display and run control of PLC
255
6F2M2000
Advertisement
Table of Contents
