Table of Contents
Advertisement
RCC SAS
9) "Stop Alarm" button: This button stops alarm sound of the HMI.
10) "Stop Blink" button: This button stops blinking to notify unauthorized status change.
11) "Station Common Alarm Reset" button: This button turns off station common alarm.
12) "Print Screen" button: This button carries out hard copying of whole screen.
13) "System Setting" button: This button displays the "System Setting" dialog.
14) "Change Log Print Status" button: This button changes status of log printer.
(Printing available/ printing stopped)
15) "Help" button: This button displays "Legend" dialog for help.
16) Three latest not-Ack alarm display area: Three latest not-acknowledged alarms are displayed.
In Test mode, the Test mode alarm is displayed.
17) LDC MD Blocking: This button blocks sending information to LDC.
18) Buttons for windows: This area displays buttons to display windows.
Single Line:
GIS:
Event:
Alarm:
Relay:
Trend:
Annunciator:
System:
19) Window button area: This area displays window buttons corresponding to the button
Switching control right is carried out by clicking this button.
Displays the buttons for bay single line diagram windows.
Displays the "GIS" window.
Displays the "Event" window.
Displays the "Alarm" window.
Displays the buttons for relay setting.
Displays the "Trend" window.
Displays the "Common Alarm Annunciator" window.
Displays the "System" window.
258
6F2M2000
Advertisement
Table of Contents
