Blocking dialog
6.5.11
The "Blocking" dialog is used to set blocking of functions such as Control blocking and Alarm
blocking.
This dialog is displayed when a blocking allowed symbol in the single line diagram is right-
clicked or a row of device/switch/measurement value/other status in the "Bay Information"
dialog is right-clicked, and "Blocking" is selected from the context menu.
.
Name display area: Displays the bay name and the device name.
Setting item display area:
Control Blocking:
Event Blocking:
Alarm Blocking:
Print Blocking:
Update Blocking:
The blocking status is also displayed in the "Blocking/Manual Override Summary"
dialog. See 6.4.1.
POINT
Figure 6.5.20 Blocking dialog
Set or reset blocking by radio buttons.
Control is blocked
Event is blocked
Alarm is blocked
Printing is blocked
Update is blocked
292
6F2M2000