Table of Contents
Advertisement
Accessing SAS Instruction Manual
4.4
Display / no-display of "Manual" button in the Legend screen is possible by parameter setting
in the LNG.ini file. In the case of display setting, it is possible to display SAS instruction manual
by the following operation. In addition, it is necessary to install the instruction manual in the
prescribed folder in advance.
1) Click the "Help" button located at the main
: 00
menu bar.
2) A new window called "Legend" will be displayed
at the screen. If the parameter of the LNG.ini file
is set to "Manual button display", the Manual
button will be displayed at the upper right of the
Legend screen.
Click Manual button.
If the parameter of the LNG.ini file is set to "No
Manual button display", the Manual button is not
displayed on the Legend screen. It is not possible
to refer the SAS instruction manual.
43
6F2M2000
1. While the "Legend" window
is being displayed on the
HMI
screen,
window is set to be still at the
forefront of the screen, even
after you select another
display function (Overview,
GIS, etc.).
"Legend"
Advertisement
Table of Contents
