Table of Contents
Advertisement
4.127 Displaying Average, Maximum and Minimum Values of the Trend
Data
How to display average, maximum and minimum values of the trend data is indicated below.
22/03/2015
22/03/2015 00:00
22/03/2015 00:00
Measurement values
at red cursor point
When Average in the tool bar is clicked again while the blue cursor is displayed, the blue cursor,
maximum, minimum, and average values disappear.
The cursor may disappear from the visible area following X-axis zoom-in
operation. The cursor retains its cursor point even if it is not visible.
Click Average twice when the blue cursor is out of the visible area, then the blue
cursors appear at both ends of X-axis.
1) Click Average in the tool bar of the "Trend"
2) A blue line cursor is displayed at both ends of
Specified
interval
Times of cursor point are displayed
22/03/2015 14:00
206
window.
X-axis. The maximum, minimum, average
values of each trend data in the interval are
displayed.
You can change the start and the end of the
interval by dragging the cursor using the
mouse.
Maximun, minimum, and average
values in the specified interval
6F2M2000
22/03/2015 23:59
Advertisement
Table of Contents
