Start Or Stop Sequence Control - Toshiba GSC1000-C Operation Manual

Start or Stop Sequence Control

4.44
How to start or stop sequence control is indicated below.
5) A symbol of Safety Tag is displayed close to
the bay name.
Symbol: PTW = Permit to Work
Symbol: SET= Sanction for Test
Symbol: LAP = Limited Access
1) Click the bay name on the bay single line
diagram.
The "Bay Information" dialog is displayed.
2) Click the "Sequence" tab.
A list of sequence control operations is
displayed.
3) Right-click the name of the sequence control
operation.
Select "Control" from the displayed context
menu.
4) The "Control" dialog is displayed.
106
6F2M2000